AP NEWS

On Colorado-New Mexico border, the trainspotting is transporting

September 22, 2018

There are hundreds of railroad museums and scenic train rides all across the United States. Many of them offer the opportunity to “step back in time” or “relive yesteryear.”

But few deliver on that promise quite like the Cumbres & Toltec Scenic Railroad — a 64-mile, narrow-gauge route across the rugged San Juan Mountains of New Mexico and Colorado that has gone nearly unchanged since the last freight train rumbled over Cumbres Pass 50 years ago. Unlike other museums that are a hodgepodge of old trains from different places, nearly all the locomotives and cars of the Cumbres & Toltec Scenic are original to the railroad they run on today.

“This place is the real deal,” says Stathi Pappas, the assistant general manager of the railroad, who spends most of his days restoring locomotives and passenger cars built more than a century ago. “There really is no place like this on Earth.”

The Cumbres & Toltec Scenic was voted the “best train ride in North America” by USA Today readers in 2016 thanks to the spectacular mountain scenery it traverses between Chama, N.M. and Antonito, Colo. But for history buffs and railroad enthusiasts, it’s the dozens of vintage railcars, smoke-spewing steam locomotives and original buildings that make the journey to the Southwest worthwhile.

What makes the spectacular railroad even more amazing is that it was almost lost for good a half a century ago.

* * *

The Denver & Rio Grande Western Railroad first put down rails in 1870, under the command of Brig. Gen. William Palmer, a Union officer brevetted during the Civil War. Looking to save money, Palmer decided to build a narrow-gauge railroad with rails just 3 feet apart, as opposed to a standard-gauge railroad with rails built 4 feet, 8½ inches apart. The railroad reached Chama in 1880. Soon after, it was busy moving people, livestock and minerals to eastern markets.

Although narrow-gauge railroads were cheaper to build, there was a major downside to a 3-foot-gauge railroad: It was incompatible with most other railroads. Whenever a Denver & Rio Grande Western train reached the junction with another railroad, the freight had to be unloaded from the narrow-gauge cars and reloaded onto standard-gauge cars for the rest of its journey. By 1890, Palmer began widening parts of his railroad. However, the route through the San Juan Mountains kept its narrow track because the railroad’s executives did not see much potential for the line, says John Bush, president and general manager of the Cumbres & Toltec Scenic.

“It made just enough money that it was worth keeping around, but it didn’t make enough money to justify upgrading it to standard gauge,” he says.

By the 1950s, the old Denver & Rio Grande Western’s narrow-gauge lines had become a historical oddity and the railroad began to consider abandoning it. However, the line got a brief reprieve. Thanks to a boom in natural-gas production near Farmington, N.M., the Denver & Rio Grande Western was called upon to move pipes and other materials to the region. Realizing the need for pipeline materials would be only temporary, railroad officials decided to invest just enough money to keep the narrow-gauge route operating — and not a penny more. The decision to squeeze every bit of usefulness out of the old railroad helped it survive into the 1960s, when the idea of preserving old rail lines for scenic excursions started to gain traction.

The end finally came in the summer of 1968. The last freight train ran over Cumbres Pass in August, and the railroad was finally able to move forward with its plan to rid itself of its unusual narrow-gauge operation. The Denver & Rio Grande Western asked the government to let it abandon almost all of the track — except for the 45-mile stretch between Durango and Silverton, Colo., which had become a popular destination for tourists.

The tracks between Chama and Antonito were about to be ripped up when historians and railroad enthusiasts began looking at ways to save the line. Their efforts to convince the states that they were worthy of saving paid off: Officials saw the potential for turning the railroad, which traversed some of the region’s most spectacular scenery, into a tourist attraction. In 1970, Colorado and New Mexico came together to purchase the 64-mile section between Chama and Antonito for $541,120. The states formed a joint board to oversee the railroad; the following year, the Cumbres & Toltec Scenic began running passenger excursions. Nearly half a century later, that investment has paid off for the states: A 2014 report found that the excursion trains support 147 jobs in the area and bring more than $14.8 million to the remote region each year.

* * *

The Cumbres & Toltec Scenic runs every day from May until October. Although passengers can start from either Chama or Antonito, the ride up the west slope of Cumbres Pass is a must for die-hard railroad enthusiasts. Trains departing Chama often require a second locomotive — what railroaders call a “helper” — to climb the 4-percent grade. Over the course of the 14-mile trip to Cumbres, the locomotive will use 2 to 3 tons of coal and 3,500 gallons of water. The backbreaking work of shoveling that coal falls to people such as Evan Martinez, a 20-year-old whose job is to maintain the locomotive’s fire. Martinez, a fifth-generation railroader, started working at the Cumbres & Toltec Scenic in high school.

“It’s a lot of cardio,” Martinez says of shoveling 3 tons of coal in one hour. “It’s probably one of the dirtiest jobs in the world. But once you get over all the soot, dust and grease, it’s a pretty cool job.”

Cumbres Pass sits at 10,015 feet above sea level and is the highest mountain pass reached by a railroad in the United States. The location gets its name from the Spanish word for “summit.” Decades ago, it was not uncommon for trains to get stuck here in gigantic snow drifts that can persist well into spring; the Cumbres & Toltec Scenic has needed to use a vintage rotary snowplow — the railroad version of a massive snowblower — to open the line for the first train of the season.

From Cumbres Pass, the train continues east downgrade through the rugged Toltec Gorge (featuring rocks from the Proterozoic Era that are more than a billion years old) and crosses over tall trestles and through tunnels. Trains stop at Osier so passengers can disembark for lunch at a nearby mess hall and the locomotives can take on water. From there, trains enter the desert of southwestern Colorado for the final stretch to Antonito. During the 64-mile trip, the train crosses the Colorado-New Mexico state line nearly a dozen times. Though a nearby highway follows the railroad for the first dozen or so miles out of Chama, after that the train is alone on the rugged southwestern landscape.

“Most of this territory doesn’t have paved roads or telephone lines,” says railroad president Bush. “So once the train pulls out of town and you’re looking out the window, you’re seeing the country as it was a century ago.”

Bush is the man who makes sure everything runs smoothly — no easy task, he says, for a railroad whose newest steam locomotive was built 93 years ago. Because the companies that built the Cumbres & Toltec Scenic’s steam locomotives went out of business decades ago, the railroad’s employees must often fashion replacement parts on their own.

Bush and his team also have the help of hundreds of volunteers who belong to the Friends of the Cumbres & Toltec Scenic Railroad. The nonprofit group was established to rebuild and maintain equipment that is not critical to the railroad’s day-to-day operation but is important to maintaining the authentic character that got it listed as a National Historic Landmark in 2012. Tim Tennant, president of the Friends group, says volunteers dedicate thousands of hours a year to rebuilding vintage freight cars and painting old buildings. During the summer, the group hosts weeklong work sessions that can attract well over 100 members.

“It’s a chance for people to get away from the day-to-day grind of normal life,” Tennant says. “(We all share) a passion for keeping this history alive.”

This year, the railroad is embarking on one of its biggest projects ever: restoring a steam locomotive built in 1883 and last used in the 1930s. Assistant general manager Pappas says rebuilding a 135-year-old locomotive is a time-consuming process that requires every part to be disassembled, cleaned, repaired and reassembled.

If everything goes according to plan, locomotive No. 168 will be rolling down the tracks again in the next few years — just as it was when President Chester A. Arthur was in office. Pappas says projects such as the restoration of old 168 make the Cumbres & Toltec Scenic a unique place.

“It’s been generations since these artifacts were used regularly,” he says, “and yet we get to turn back the clock here.”

AP RADIO
Update hourly