This content is a press release from our partner Business Wire. The AP newsroom and editorial departments were not involved in its creation.
PRESS RELEASE from provider: Business Wire
This content is a press release from our partner Business Wire. The AP newsroom and editorial departments were not involved in its creation.

Efficient Power Conversion (EPC) Publishes Tenth Reliability Report Highlighting Gallium Nitride Device Testing Beyond Automotive AEC-Q101 Qualification

February 26, 2019

EL SEGUNDO, Calif.--(BUSINESS WIRE)--Feb 26, 2019--EPC announces its Phase Ten Reliability Report, documenting the test results leading to the successful completion of automotive AEC-Q101 qualification. AEC-Q101 demands the highest level of reliability standards for power FETs, requiring not only zero datasheet failures, but also low parametric drift during stress testing. Of note is that EPC’s WLCS packaging passed all the same testing standards created for conventionally packaged parts, demonstrating that the superior performance of chip-scale packaging does not compromise ruggedness or reliability.

Reliability testing that goes beyond the AEC-Q101 requirement to develop a deeper understanding of unique mechanisms that could lead to device failure is also explored in the report. A section is devoted to examining the extremes of dynamic R DS(on) testing during hard-switching conditions. This testing demonstrates that eGaN devices are stable over long term continuous switching operation.

A third section expands on the accelerated stress testing previously explored in the EPC Phase 6 report. Beyond gate leakage being monitored continuously, other device parameters (V TH and I DSS ) are logged on regular intervals. This kind of data gives a more complete picture of device degradation under high gate stress conditions and provides visibility to multiple independent physical failure mechanisms. Testing demonstrates that eGaN FET gates are very rugged and reliable.

According to Dr. Alex Lidow, CEO and co-founder of EPC, “eGaN devices have been in volume production for over nine years and have demonstrated very high reliability in both laboratory testing and customer applications such as lidar for autonomous cars, 4G base stations, and satellites to name just a few. In fact, there have been no field failures in over two years despite shipping millions of parts.”

Dr. Lidow continues, “With the release of this reliability report, we continue our commitment to subject GaN devices to rigid industry standards and share the results with the power conversion industry − as confirmed with over 30,000 EPC parts stress-tested for more than 18 million hours without failure.”

The Phase Ten Reliability Report adds to the growing knowledge base published in EPC’s first nine reports and represents an ongoing commitment to study, learn, and share information on the reliability of GaN technology.

About EPC

EPC is the leader in enhancement mode gallium nitride based power management devices and was the first to introduce enhancement-mode gallium-nitride-on-silicon (eGaN) FETs as power MOSFET replacements in applications such as DC-DC converters, wireless power transfer, envelope tracking, RF transmission, power inverters, remote sensing technology (LiDAR), and class-D audio amplifiers with device performance many times greater than the best silicon power MOSFETs.


eGaN is a registered trademark of Efficient Power Conversion Corporation, Inc.

View source version on businesswire.com:https://www.businesswire.com/news/home/20190226005313/en/

CONTACT: Efficient Power Conversion

Renee Yawger




SOURCE: Efficient Power Conversion

Copyright Business Wire 2019.

PUB: 02/26/2019 09:00 AM/DISC: 02/26/2019 09:01 AM